Dr. Brown's Bottles and Microplastics: Materials and Prep
Last reviewed: by the MicroPlastics Research Desk. Submit a correction or see our editorial standards.
Quick answer

On this page
- What are Dr. Brown’s bottles made of?
- Are Dr. Brown’s bottles BPA-free?
- What the polypropylene bottle research found
- Is there a Dr. Brown’s microplastics lawsuit?
- Does Dr. Brown’s have lead?
- What about the Dr. Brown’s formula pitcher?
- How to reduce plastic contact when preparing a Dr. Brown’s bottle
- Dr. Brown’s versus other brands
- What the evidence does not establish
Want the whole plan in one place? Less Plastic, Room by Room, our $19 guide.
People also read
Key Takeaways
- Yes, Dr. Brown’s makes plastic bottles. Its FAQ says they are BPA-free polypropylene. It also sells borosilicate glass and PPSU versions.
- The inside parts are the same story in every version. Nipples are silicone. The vent insert, reservoir, collar and cap are described only as BPA-free.
- The pitcher’s material is not named. Dr. Brown’s lists it as BPA-free and safe for boiling water and sterilizers.
- The lawsuit ended without a finding. A judge dismissed key claims with leave to amend; the plaintiffs then dropped the case.
- No lead was detected in the glass bottle Consumer Reports tested. We found no lead recall of Dr. Brown’s bottles.
- Heat is the main lever. In the 2020 study, hotter water released far more particles from polypropylene bottles.
Dr. Brown's bottles and the research, by the numbers
- particles per litre, at most, from polypropylene bottles
- 16.2 million
- lab test after sterilization and 70°C water; brands not named in the abstract or university release
- Li et al., Nature Food 2020; Trinity College Dublin
- particles per litre at 25°C vs 95°C
- 0.6 vs 55 million
- same study: temperature drove release
- Trinity College Dublin release, October 2020
- lead, BPA or phthalates in the Dr. Brown’s glass bottle tested
- Not detected
- one of nine bottles; CR did not test for microplastics
- Consumer Reports, updated October 2025
- date the Dr. Brown’s microplastics class action was voluntarily dismissed
- May 20, 2025
- without prejudice; no ruling that the bottles release or harm
- N.D. Cal. docket 4:24-cv-03782
What are Dr. Brown’s bottles made of?
Dr. Brown’s answers this directly in its FAQ: its bottles are made of “BPA-free polypropylene plastic or BPA-free, pharmaceutical-grade borosilicate glass.” The same answer says the vent insert, vent reservoir, travel disk, nipple collar and cap are BPA-free, and that the nipples are silicone. It does not say what plastic those smaller parts are made of. The FAQ does not mention the newer PPSU bottle, which the product page describes as “premium PPSU” with a natural amber color.
| Line or part | What Dr. Brown’s says it is made of | Note |
|---|---|---|
| Options+ bottle (standard, clear) | BPA-free polypropylene (FAQ) | Product page says BPA free and recyclable; resin named only in the FAQ |
| Options+ glass, narrow and wide-neck | Borosilicate glass (FAQ and instruction leaflet) | Silicone sleeves sold separately |
| Options+ PPSU | PPSU (polyphenylsulfone), a different plastic | Not covered by the 2020 polypropylene study |
| Nipple | Silicone | Same in all bottle versions |
| Vent insert, reservoir, travel disk | BPA-free; resin not named | Sits inside the milk in every version, including glass |
| Collar and cap | BPA-free; resin not named | Collar touches milk at the nipple |
| Formula Mixing Pitcher | BPA Free; material not named | Vessel rated for boiling water and sterilizers |
| Sippy spout (conversion kit) | 100% silicone | Replaces the nipple on Options+ bottles |
What about Tritan? We did not find Tritan named on any Dr. Brown’s bottle page or in its FAQ, and a search of its online store for the word returned no products. Its plastic-free-vessel option is glass. Its sustainability page describes “#5 Polypropylene plastic components,” which fits the FAQ. If you want background on the materials themselves, see our pages on polypropylene, borosilicate glass and silicone.
One practical point follows from the table. A Dr. Brown’s glass bottle swaps the vessel, which is the largest surface touching the milk. The vent system, collar and nipple stay the same kind of parts. The Options+ narrow glass 8 oz is listed in our shop on that basis: glass vessel, silicone nipple, internal vent system, with the vent and collar resin not established. Dr. Brown’s says the vent can be removed as feeding develops, but follow its guidance on that rather than removing parts only to cut plastic.
Are Dr. Brown’s bottles BPA-free?
Yes. Dr. Brown’s says every bottle and part is BPA-free, and each product page we read repeats it. That is also the baseline for the US market: in 2012 the FDA amended its rules to no longer allow BPA-based polycarbonate in baby bottles and sippy cups.
“BPA-free” answers a chemical question. It does not tell you whether a plastic sheds particles. Polypropylene never contained BPA in the first place. Our guide to whether BPA-free plastic is safe covers the replacement-chemical debate, so we will not repeat it here.
What the polypropylene bottle research found
The study behind most baby-bottle microplastic headlines is Li and colleagues, Nature Food, 2020, from Trinity College Dublin. Its abstract reports that polypropylene feeding bottles released microplastics “with values as high as 16,200,000 particles per litre,” and that sterilization and high-temperature water significantly increased release. The university’s release adds the temperature series: about 0.6 million particles per litre at 25°C, up to 16.2 million at 70°C after sterilization, and up to 55 million at 95°C.
Was a Dr. Brown’s bottle tested? We cannot say. The release says the team tested 10 representative bottles that together account for 68.8% of the global bottle market. Neither the abstract nor the release names a brand, and the full paper is paywalled, so we could not check its methods or supplementary data. Any claim that “the study tested Dr. Brown’s” needs a source we did not find.
Three limits matter for parents. First, the daily figures, such as 14,600 to 4,550,000 particles per infant per day across 48 regions, are modeled estimates, not measurements in babies. Second, the study did not measure health effects; the authors called for research on whether these levels pose a risk. Third, the results are for polypropylene, not PPSU, glass or silicone. The paper lists public research funding (Enterprise Ireland, Science Foundation Ireland, Trinity College Dublin and the China Scholarship Council) and states no competing interests. Our baby bottle materials guide covers this study and the silicone-teat research in more depth.
Is there a Dr. Brown’s microplastics lawsuit?
There was one, and it is over. Here is what the court record shows.
| Item | What the record shows |
|---|---|
| Court and case | US District Court, Northern District of California, No. 4:24-cv-03782, Judge Yvonne Gonzalez Rogers |
| Filed | June 25, 2024, as a proposed class action |
| Products named | Options+ Narrow and Wide-Neck baby bottles and four Milestones sippy and sippy straw bottles. Glass bottles were not named. |
| What was alleged | That the polypropylene products release microplastics when heated in normal use, that packaging did not warn of this, and that "BPA FREE" and "#1 Pediatrician Recommended" labels misled buyers |
| April 29, 2025 ruling | Motion to dismiss granted in part and denied in part, with leave to amend |
| How it ended | Plaintiffs filed a voluntary dismissal without prejudice on May 20, 2025 |
The complaint made the allegations; the court did not test them. In its April 2025 order, the judge found the plaintiffs had not pleaded that they relied on the “BPA FREE” or “#1 Pediatrician Recommended” labels. On the failure-to-warn theory, the order says the plaintiffs did “not identify a threshold at which the amount of microplastics exposed to children become unreasonably unsafe,” and that the studies they cited did not refer to Dr. Brown’s products. Some parts survived, including the unjust enrichment claim in the alternative. The plaintiffs were given time to amend, and instead dismissed the case.
So: no court found that Dr. Brown’s bottles release microplastics or cause harm, and none found the opposite. We found no settlement. A dismissal without prejudice means the claims could in principle be filed again. Consumer Reports notes that similar suits were filed in June 2024 against several bottle makers, and that nothing suggests the bottles named in them are worse than other plastic bottles. If you see “Dr. Brown’s microplastics lawsuit” in search suggestions, that reflects what people search for, not a finding.
Does Dr. Brown’s have lead?
The best public data point is Consumer Reports. It tested nine popular bottles, including the Dr. Brown’s Natural Flow Anti-Colic Options+ in glass, by cutting or scraping material and analyzing it. It did not detect lead, BPA or phthalates in any of the nine. CR still cautions that without testing a specific product there is no way to know for sure, and it did not test for microplastics.
The lead cases CR describes involved printed decals or coatings on other brands’ glass bottles, such as a 2022 Nuk glass bottle recall. We found no lead recall of Dr. Brown’s bottles. Dr. Brown’s FAQ says the ink on its printed bottles is non-toxic, but the brand does not publish lead test results on the pages we read.
Keep going · Chapter 4 of 10
Drinking water: tap, filters and bottles
What the bottled water studies counted, what a filter certificate covers, and what a home test cannot see.
- One chapter of Less Plastic, Room by Room, 77 pages
- 22 swaps, each with a cost band, and a 30-day plan
- 165 studies cited, to the same standard as this article
Use the App
Check what your baby gear is made of
Scan a bottle, cup or pitcher to see its declared materials, the brand's heat and care guidance, and glass or steel alternatives.
What about the Dr. Brown’s formula pitcher?
The Formula Mixing Pitcher mixes up to 32 oz of formula with a plunger-style blade designed to add less air than shaking. Its product page says “BPA Free” and top-rack dishwasher safe. Its instruction leaflet says the pitcher vessel can go in the dishwasher, electric and microwave sterilizers, or boiling water, and tells you to follow the formula maker’s mixing instructions. Neither names the material.
That matters because the pitcher is where formula meets hot water, if your routine uses hot water. The 2020 study found heat was the biggest driver of release from polypropylene. We found no study of this pitcher or of any formula pitcher, so there is no particle count to give. If you want to keep the hot step away from plastic, mix in a clean glass or stainless steel container instead, as described below.
How to reduce plastic contact when preparing a Dr. Brown’s bottle
Start with the CDC’s formula guidance, the formula label and your pediatrician. CDC advises very hot water, around 158°F (70°C), for babies younger than 2 months, born prematurely or with a weakened immune system, then cooling before feeding. None of the steps below replaces that. They are ways to cut plastic contact inside a safe routine.
- Consider the glass bottle. Dr. Brown’s glass is borosilicate. It changes the vessel, not the vent, collar or nipple.
- If you mix with hot water, do it in glass or steel. The Trinity researchers suggested preparing formula in a non-plastic container with water of at least 70°C. Clean and sanitize that container like any feeding item; CDC notes that extra mixing tools can add a germ risk.
- Let it cool before it goes into plastic. The same researchers suggested cooling to room temperature before transferring into a plastic bottle. With glass, avoid sudden swings: Dr. Brown’s says sudden temperature changes can crack glass bottles.
- Never microwave the bottle. Dr. Brown’s bottle leaflet and CDC both say no, because of hot spots. To warm, Dr. Brown’s says to remove all bottle parts first and use the storage cap.
- Swirl or stir gently, do not shake hard. Dr. Brown’s says not to shake its bottles, and the Trinity list also says to avoid vigorous shaking. CDC calls swirling in the bottle a safe way to mix.
- Replace worn parts. Dr. Brown’s says to change nipples after six weeks of use and to discard parts at the first sign of damage.
- Keep cleaning and sanitizing as directed. The Trinity list also included rinsing sterilized bottles with cooled sterilized water. That step is not in CDC guidance, and we do not suggest changing your sanitizing routine on the basis of one study.
For kettles and other hot-water gear, see microplastics in electric kettles. For formula itself, see microplastics in baby formula. Our parent checklist covers storage and toddler food.
Dr. Brown’s versus other brands
Dr. Brown’s is not unusual here. Consumer Reports lists plastic bottles from several major brands among the nine it tested, and similar lawsuits named other makers in 2024. What sets Dr. Brown’s apart is the internal vent system: extra plastic parts that sit in the milk in every version, glass included. Our Philips Avent page looks at that brand separately.
What the evidence does not establish
- That Dr. Brown’s bottles are unsafe. No study we found tested Dr. Brown’s bottles by name, and no court made a finding about them.
- A particle count for any Dr. Brown’s bottle or the pitcher. The 16.2 million figure is for unnamed polypropylene bottles under lab conditions.
- A health effect in babies. The 2020 study measured release and modeled intake. It did not study health.
- The resin of the vent parts, collar, cap or pitcher. Dr. Brown’s says BPA-free but does not name them.
- That glass makes a feed plastic-free. The vent, collar and silicone nipple remain.
What the MicroPlastics app checks
- The declared material of a scanned bottle, cup or pitcher, such as polypropylene, PPSU, glass or silicone.
- The brand’s own heating, sterilizing and dishwasher guidance, where it is published.
- Glass, steel and silicone alternatives in a similar size.
- Product information only: the app does not measure particles or chemicals in your baby’s milk.
Frequently Asked Questions
Does Dr. Brown's have plastic bottles?
Is there a Dr. Brown's microplastics lawsuit?
Do Dr. Brown's bottles release microplastics?
Does Dr. Brown's have lead?
What is the Dr. Brown's formula pitcher made of?
Are Dr. Brown's glass bottles borosilicate?
Sources
- Dr. Brown's (Retrieved November 14, 2026). FAQ: What are your bottles made of?. drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Anti-Colic Options+ Narrow Glass Baby Bottle, 8 oz, 4-pack (SB84024). drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Natural Flow Anti-Colic Options+ Narrow Baby Bottle, 8 oz (SB81005). drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Anti-Colic Options+ Narrow PPSU Baby Bottle, 8 oz. drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Natural Flow Anti-Colic Options+ Wide-Neck Glass Baby Bottle, 9 oz. drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Options+ Narrow Replacement Vent Kit, 8 oz. drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Formula Mixing Pitcher (AC235). drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Universal bottle instructions, BFW001 F6. Dr. Brown's (PDF).
- Dr. Brown's (Retrieved November 14, 2026). Formula Mixing Pitcher instructions, BFW009 F9. Dr. Brown's (PDF).
- Dr. Brown's (Retrieved November 14, 2026). Product instructions index. drbrownsbaby.com.
- Dr. Brown's (Retrieved November 14, 2026). Sustainability and recycling. drbrownsbaby.com.
- Li D, Shi Y, Yang L, et al. (2020). Microplastic release from the degradation of polypropylene feeding bottles during infant formula preparation. Nature Food 1:746-754. doi:10.1038/s43016-020-00171-y.
- Trinity College Dublin (2020). High levels of microplastics released from infant feeding bottles during formula prep (October 19, 2020). tcd.ie.
- US District Court, N.D. California (2024). Cortez and Miller v. Handi-Craft Company, Inc., No. 3:24-cv-03782, Class Action Complaint (Document 1, filed June 25, 2024). Copy hosted by ClassAction.org.
- US District Court, N.D. California (2025). Order granting in part and denying in part motion to dismiss with leave to amend, No. 4:24-cv-03782-YGR (Document 47, April 29, 2025). Copy hosted by State Impact Center.
- US District Court, N.D. California (2025). Notice of voluntary dismissal without prejudice (Document 48, May 20, 2025). CourtListener.
- CourtListener (Retrieved November 14, 2026). Docket: Miller v. Handi-Craft Company, Inc., 4:24-cv-03782 (N.D. Cal.). Free Law Project.
- Loria K (2025). Baby Bottles With No Detected BPA, Lead, or Phthalates (updated October 8, 2025). Consumer Reports.
- US Food and Drug Administration (2023). Bisphenol A (BPA): Use in Food Contact Application. FDA.
- Centers for Disease Control and Prevention (2026). Infant Formula Preparation and Storage (May 14, 2026). CDC.
- Centers for Disease Control and Prevention (2024). How to Clean, Sanitize, and Store Infant Feeding Items: FAQ (April 16, 2024). CDC.
Build your nursery + pregnancy product audit
Save baby-product assessments and get an alert when a saved product gets new research. The app remembers the product context; it does not measure pregnancy or infant exposure.
- iOS and Android
- Current terms in each store
“Really cool to scan stuff around the kitchen and see what's actually in it. The swaps it suggests are realistic.” App Store review · 5.0★
Related Research
Baby Bottles and Microplastics: Glass, Steel & Silicone
Compare documented assemblies and source-specific bottle and teat studies. No zero-particle promises or changes to formula preparation and hygiene.
Read moreMicroplastics in Baby Bottles and Kids’ Food: A Practical Checklist
Check feeding safety, complete bottle assemblies, storage instructions, toddler cups and model-specific filter claims without inventing a personal exposure ranking.
Read morePhilips Avent Bottles and Microplastics: What We Found
What Philips says Avent bottles are made of, BPA, what the 2020 bottle study tested, the two 2024 lawsuits, the lead question, and prep tips.
Read moreMicroplastics in Baby Formula: Bottle Evidence and Safe Prep
Separate formula, water, bottle and packaging evidence. What modeled intake means, and why particle concerns should not change dilution, heating or hygiene.
Read moreIs BPA-Free Plastic Actually Safe?
"BPA-free" only means one chemical wasn't used. Replacements (BPS, BPF) show similar endocrine activity. And the plastic still sheds microplastics. The label that tricks shoppers.
Read moreMicroplastics in Plastic Kettles: The 11.8 Million Particle Study
A 2024 study found a new plastic electric kettle releases up to 11.8 million nanoplastic particles per mL on the first boil. lower-plastic-contact stainless and glass kettle picks.
Read more
